国产精品三级一区二区,亚洲AV永久无无码精品一区二区三区

UHME PE Pad
Your current location:Home > PRODUCTS > Marine Mooring Equipment > UHME PE Pad

Customizied UHMW-PE Pad

2（7）.JPG

Customizied UHMW-PE Pad

UHMW-PE is a subset of the thermoplastic polyethylene.Also known as HMPE or HPPE, it has extremely long chains,with a molecular mass usually between 2 and 6 million u. The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material. with the highest impact strength of any thermoplastic presently made.
UHMW-PE is odorless, tasteless,and nontoxic. It is highly resistant t corrosive chemicals except oxidizing acids,has extremely low moisture absorption and a very lw coefficient of friction;is self-lubricating;and is highly resistant to abrasion, in some forms being 15 times more resistant to abrasion than carbon steel.

Specifications
1.good wear resistance
2.perfect impact resistance
3.good self-lubricating
4.ISO9001
5.kinds of colors available

Data Sheet:

S/No	Item	Unit	Test Stardand	Result
1	Dentisty	G/cm²	GB/T1033-1966	0.95-1
2	Molding shrinkage%		ASTMD6474	1.0-1.5
3	Elongation at break	%	GB/T1040-1992	238
4	Tensile strength	Mpa	GB/T1040-1992	45.3
5	Ball Indentation hardness test 30g	Mpa	DINISO 2039-1	38
6	Rockwell	R	ISO868	57
7	Simply supported beam hardness	KJ/m	ISO179	85
8	Bending strength	Mpa	GB/T9341-2000	23
9	Compression Strength	Mpa	GB/T1041-1992	24
10	Statie soflening temp		ENISO3146	132
11	Specific heat	KJ		205
12	Impact strength	Kj/m²	D-256	100-160
13	Heat conductivity	%	ISO11358	0.16-0.14
14	Sloding properties and friction coefficient			0.19
15	Sloding properties and friction coefficient	PLastic/stccL （dry)		0.14
16	Antistatic Coefficient	SL-CM		10
17	Water absorption	ASTMS570		<0.01%